Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Samsung Quad QSA 30 Final setup

Views: 1059

#66787

Samsung Quad QSA 30 Final setup | 9 July, 2012

I have gotten to what I hope is the last step before I can start running product. However, I have and keep receiving an "Invalid Place Position X" error in three steps of the placement program.

I have verified that the camera can indeed find these parts based on the XY data. These parts are close to the PCB edge.

Any suggestions as how I can resolve this?

Please see the attached.

Attachments:

reply »

#66788

Samsung Quad QSA 30 Final setup | 9 July, 2012

Make sure the board size is big enough. the placement can not be outside of the board size.

reply »

#66790

Samsung Quad QSA 30 Final setup | 9 July, 2012

I found out that the machine origin was in the wrong place. Once I adjusted that eveything fell into place.

reply »

SMT Custom Nozzles

PCB Rework / Repair Services