Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Heller 1700D: How to make the zones start in sequence?

Views: 1098

#66590

Heller 1700D: How to make the zones start in sequence? | 14 June, 2012

Hi all,

We have two Heller ovens, a 1700SX and a 1700D. The 1700SX has the profiles made so when you load them the zones turn on in sequence. First zone top and bottom are on when the profile is loaded then the next (top and bot) start to turn on as the previous one reach temperature.

I was trying to duplicate this in the 1700D profiles but I can figure out how it is done. We are trying to limit the current surge.

1. Does anyone know how to do this? The software runs under DOS.

2. Is anyone using a windows based program?

Thanks guys.

reply »

#66612

Heller 1700D: How to make the zones start in sequence? | 18 June, 2012

We have a Heller 1707EXL oven. I am assuming the software package that came installed on the computer for the oven is very similar to what you have for your oven.

One of the programs in that software package is "ovensetupwizard.exe" You need to have the oven completely shut down and be exited out of the oven control software program before running the oven setup wizard. There are several screens in the wizard program for setting up all kinds of things on the oven. One of those screens allows you to set up turning on the zones in sequence.

reply »

Reflow Oven

Precision Auger Dispense Pump