Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


depanelizing router

Views: 2767

#65706

depanelizing router | 3 January, 2012

What would be the best router to use that would allow clearance on the top side for large components and long wires on the top side of the board? High volume so must be fast.

reply »

#65715

depanelizing router | 5 January, 2012

Singulation is much faster and cleaner than routing

Here's a link to a fairly recent article on gang sawing CSP http://www.electroiq.com/articles/ap/print/volume-9/issue-10/features/step-by-step/step-11-the-back-end-process-singulation-step-by-step.html

reply »

#65717

depanelizing router | 5 January, 2012

Check out Asys Automation, have a few solutions available from semi auto to high volume...

reply »

#65718

depanelizing router | 5 January, 2012

* Singulation (Wand 847-459-2400 F2421, Circuit Technology 708-705-2140 f2141 John Bambule, Pioneer - Dietecs 781-682-7900 F0338 Gerry Larson) * Routing (Cencorp 303-530-0891 bill stranathan 303-772-5933x227, 0Z0 Automation 800-366-0401 Chip Gill) * Scoring cutters (FKN Systek 781-642-6820 fax 6818, Radoll Designs 912-228-0200, CAB Technology Westfield, MA 978-392-3459 f3601)

reply »

#65742

depanelizing router | 11 January, 2012

New Webinar on Laser Depaneling

SMTA Webinars On February 9th, Josh Brown of LPKF Laser & Electronics will walk you through the advantages and disadvantages of laser depaneling in comparison to more traditional methods of depaneling such as routing, die cutting and dicing saws. By the end of the webinar you will have a better understanding of laser depaneling and if it is a viable solution for your needs.

Let us add to this by saying, we don't work for the company referenced above, don't own stock in the company referenced above, have never known anyone who works at the company referenced above and whether you buy a product from the company referenced above or not we don't get anything for writing this. We are not "fanboys" of the company referenced above, although we can give credit where credit is due and lately the company referenced above has deserved a lot of credit for some of their products.

reply »

SMT in-printer dispensing