Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Philips Comet Error E2 - Correction Data Error

Views: 1922


MK

#65593

Philips Comet Error E2 - Correction Data Error | 7 December, 2011

Hi, I am looking for help with Error Philips Comet, Start Procedure -OK, INTIAL SERVO ORIGIN -OK, AUTORUNNING -OK, PCB START -OK, FIDUCIAL -OK, PICKUPCOMPONENT -OK,

NEXT-ERROR E2 CORRECTION DATA ERROR(CORRECTION DATA IS NOT LOADED OR FAILED TO ADJUST THE ROTATIONAL ANGLE FOR FINE MODE WITHIN LIMIT.THE LIMIT IS SPECIFIED AS FINE IN MACHINE DATA)

Hope that you will find someone to help. MK

reply »

#65598

Philips Comet Error E2 - Correction Data Error | 7 December, 2011

go to Components Info. F4 to Pick & Mount Info scrool down to Mount Action change to Normal instead of Fine.

reply »


MK

#65608

Philips Comet Error E2 - Correction Data Error | 8 December, 2011

Hi, I look Pick & Mount and Mount action was NORMAL - OK. When the head pick component then stop outside lamp housing (fixed camera - recognition camera) and then discard component. It repeat 3x, and Error E2. When I do adjust assistant for components vision test is OK (component was detected successfully). MK

reply »

Heller Industries Mark 5获得了 2015年中国SMT远见奖 - 回焊炉领域

Fluid Dispense Pump Integration