Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


DEK 265GSX squeegee travel distance

Views: 2249

#64507

DEK 265GSX squeegee travel distance | 16 June, 2011

Does anyone know if it is possible to change the distance that the squeegees travel? What i mean is... Is it possible to change where the squeegees start and stop during a print? Our squegees seem to stop right at the edge of the apertures and this causes lots of paste to fall into the apertures. We get excessive amounts of paste on the edges of the boards. On an MPM machine this option is called squeegee stroke. Is there such an option on these DEK machines? Thanks for any help!

reply »


aj

#64508

DEK 265GSX squeegee travel distance | 17 June, 2011

yes there is - I think it is called front print limit & rear print limit

reply »

#64576

DEK 265GSX squeegee travel distance | 29 June, 2011

Yes it is "Print Front Limit" and "Print Rear Limit".

Negative value extends the stroke,

Depends on software version how useful it will be, as there are differing limits on how much you can extend the stroke.

http://www.dekhead.com

reply »

Thermal warpage test services

Reflow Oven