Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Contact 3AV-100. PCL-240AK position Error. Machine not hommed

Views: 1981

#63644

Contact 3AV-100. PCL-240AK position Error. Machine not hommed | 27 January, 2011

Could somebody tell me what could be causing my Contact 3AV-100 machine is showing the message "PCL-240AK position Error. Machine not hommed"? Thanks

reply »

#63659

Contact 3AV-100. PCL-240AK position Error. Machine not hommed | 28 January, 2011

The PLC240-AK is an IC on the stepper board used to control all the stepper driven axis. I don't remember which axis are driven by stepper motors, possibly the table (x axis). Which axis acts wierd or doesn't move when you home the machine?

reply »

#63660

Contact 3AV-100. PCL-240AK position Error. Machine not hommed | 28 January, 2011

The issue was with the actuator 2. after we clean and lubricate it the issue disapear.. Thank you.

reply »

SMT Machines

PCB equipment