Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


solder paste printing

Views: 4308

#63640

solder paste printing | 27 January, 2011

How can I print two various heights of solder paste on the same board , no space for graded stencil

reply »

#63645

solder paste printing | 27 January, 2011

Mydata MY500

reply »

#63649

solder paste printing | 28 January, 2011

Print then dispense in the areas you need extra paste. Why can you not use a stencil which has areas etched away around component patterns to thin the stencil down....for example a 150 micron thick stencil etched to 120 or 100 microns in specific areas. What are the thicknesses of paste you need ?

reply »

#63653

solder paste printing | 28 January, 2011

Use tape and reeled solder preforms and place them where ever you need more solder volume.

reply »

#63663

solder paste printing | 28 January, 2011

Milara has a combined Stencil printer + jet Printing ???

Print and then jet print areas not printed or top up prints.

reply »

reflow oven profiler