Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

MCS-30 Printer Problem

Views: 1389


MCS-30 Printer Problem | 22 December, 2010

I have a FUJI MCS-30 and no way to print from it. I need a cable that goes from the printer to the connector on the back of the computer, or an adaptor that will allow me to use my dot matrix printer. The printer is new so I don’t want to replace it with a FUJI printer. Any suggestions or comments will be welcomed.

reply »

SMT in-printer dispensing

Used SMT machines