Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


troubleshooting simplematic board loader

Views: 3035

#62876

troubleshooting simplematic board loader | 7 October, 2010

I am trying to repair two Simplematic 8130 board loaders. I have the same error on both of them. The error says " NO PLC Loaded." I don't believe that it is the plc but instead the display "uticor" system. Can anyone give some advise on how to fix this problemwithout breaking the bank.

reply »

#62897

troubleshooting simplematic board loader | 11 October, 2010

I've had this problem before. Typically happens when the Lithium Battery dies and the machine loses the program. Usually you can pull the displays out and ship them to Simplematic. They can reload the program for you. Roughly $2500 bucks I think. Call them. Their Tech Support is pretty good.

reply »

#62899

troubleshooting simplematic board loader | 12 October, 2010

Buggery on the high seas.

reply »

#62908

troubleshooting simplematic board loader | 13 October, 2010

$2500 to send a plc program to the display??

I'm in the wrong business. =/

reply »

#62911

troubleshooting simplematic board loader | 13 October, 2010

It might be half that. I can't remember. I'm an old man and I'm frazzeled!

reply »

Non-heated dispensing system

Used PCB Equipment - AdoptSMT