Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Seeking AXI machine

Views: 5336

#62866

Seeking AXI machine | 6 October, 2010

Dear All

I need to check the solder paste volume inside the PTH at our board,which size is 440x620 mm.So, I may need 3D inspection machine,AXI, not AOI.So, does anyone recommand me which 3D machine is suited to my PCB? Thanks in advance.

reply »

#62907

Seeking AXI machine | 13 October, 2010

> Dear All > > I need to check the solder paste > volume inside the PTH at our board,which size is > 440x620 mm.So, I may need 3D inspection > machine,AXI, not AOI.So, does anyone recommand me > which 3D machine is suited to my PCB? Thanks in > advance.

Hello

because of your board size you need a big x-ray system for this all system are under 600mm,be careful for height clearance when chosing the system. Dage has one for big PCB XD7800 NT, where u can check the volome paste or void. check this: http://www.dage.de/download/xray/XD7800NT950%2006_09_y%20Technical%20Data%20Sheet.pdf

have a good day

florin costache

reply »

#62915

Seeking AXI machine | 13 October, 2010

Thanks Florin Yes, it is difficult to find a AXI machine for our such big boards. Just sharing with u,I found that 2 machines which can inspect big size PCB.They are Spectra XL from Machine Visoin Product, and X7056 from VISCOM.

Best Regards Jack

reply »

#62918

Seeking AXI machine | 14 October, 2010

hi

i dont know this 2 systems, i work with %DX frm Agilent , Tiger from FeinFocus and XD7800 from Dage and this one is realy big. Viscom and the other one i dont know for haw long the time are in this AXI area...and if u need to do only sample test and no need to inspct all production, u can use one off line system where u can have also trasabylity... regards florin

reply »

#62937

Seeking AXI machine | 17 October, 2010

Thanks Florin Yes, XD7800NT950 is capable to inspect our such big board. And, there is local distributor,too. now, we decide to check with Viscom and Dage. Thanks you again. Good days ahead.

reply »

#62942

Seeking AXI machine | 18 October, 2010

Hi Jacki,

My name is Sandor and we are DAGE representative in Romania. Could you please re-send me your requirement by e-mail? And I will help you to find the right loaction where you can check your board. my e-mail: sbabos@quiptech.com

Thank you in advance Sandor

reply »

#62961

Seeking AXI machine | 21 October, 2010

Hi Sandor

I just reached the local DAGE guy,CH Liu. Thanks for your concern. Good Days Ahead.

Jacki

reply »

SMT Machines

Solder Paste Inspection