Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


HELP! Need MCH file to CSM84V-III and CSM66-III

Views: 1386

#62453

HELP! Need MCH file to CSM84V-III and CSM66-III | 17 August, 2010

Hi,

I bought Philips CSM machines (CSM66-III and CSM84V-III). I need flopy disc with some files (MCH, VIS, FDR). I created MCH file but the machine send me an error message: BAD FORMAT DATA. Could anyone help me and send me correct files.

Thanks

reply »

#62483

HELP! Need MCH file to CSM84V-III and CSM66-III | 19 August, 2010

If you need a disk, I can get it. You only need a sample USER.MCH file. You can use the sample disc to start both the 84V and 66V but after you must set the configuration of both machines as I do not know your options fitted. You will then need to Calibrate the machines, including the Shift & Scale for the Vision files on both cameras of the 84V. This is all a lot of work for you. I would be better to find the original data ! I would need your email address to send the USER.MCH.

reply »

#62485

HELP! Need MCH file to CSM84V-III and CSM66-III | 20 August, 2010

Please send me everything what you have to a.nowicki@propox.com

Thank you

reply »

Facility Closure

Essemtec Spider SMT Fluid Dispenser