Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


DEK 265GSX Rail System Error

Views: 2312

#61994

DEK 265GSX Rail System Error | 4 June, 2010

We have a DEK 265 printer currently down due to the rail system error. The message "Belt Motor Error. Rail lifted error, check tooling" pop-up when pressed run. I did remove all the support pins prior loading a new job. I also ran rail system dianogsis and it seems to be okay.

Any help would be greatly appreciated.

reply »

#61995

DEK 265GSX Rail System Error | 4 June, 2010

Have you checked the Rail Lifted Sensor

reply »

#61997

DEK 265GSX Rail System Error | 4 June, 2010

there are 2 rail lift sensors at left and right of the table, maybe need to clean or re-adjust.

reply »

#62004

DEK 265GSX Rail System Error | 5 June, 2010

As stated, that error relates to rail lifted sensord (L & R)... Machine is perceiving that something is causing rails to lift at inappropriate time. You can monitor sensor status in Rising Table diagnostic to see that they are toggling appropriately. Possible debris on clatterbar; sensor connections... Let us know.

http://www.dekhead.com

reply »

Reflow Ovens thermal process improvement

PCB Soldering Tools