Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


DEK 265GSX Problem

Views: 1158

#61735

DEK 265GSX Problem | 2 May, 2010

My DEK 265GSX will not boot in the mornings. When I check my power supplies 5 volts is measuring 1.6v. When I disconnect 5v I read 5.3v on the power supply. When I reconnect to the power supply the problem goes away. Has anyone seen this problem and how did you fix it?

reply »

#61737

DEK 265GSX Problem | 2 May, 2010

Something is surging on the 5V line tripping overcurrent on PSU2... If you've got autoflex on the machine the Y15 is th most likely culprit... I've also seen it with the Y2.

www.dekhead.com

reply »

Reflow Oven

PCB X-Ray Inspection