Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Fuji servo IS70B board error codes?

Views: 2248

#61635

Fuji servo IS70B board error codes? | 16 April, 2010

We're still trying to fix a C-axis overflow error in our CP-65. I was swapping servo boards and one of them started to blinks a 2 on the LED single digit display and the machine didn't boot up. I replaced the servo board with a spare we bought on ebay for the original problem (it didn't fix the original problenm) and now it boots up. If I swap servo boards 1 and 2 the C-axis error goes away but we get either nozzle origin errors (st12), or some error with the nozzles at st17 and 19. These errors didn't show up before we swapped the boards (1 and 2). This is sooooo frustrating!. So if anyone can help with the questions below, I would greatly ... thank you:

1. What does a blinking "2" mean 2. What are the error codes for these servos 3. If you have a CP-65: Does it matter the revision of the servo boards (and firmware)? 4. If you have a CP-65: What revision and firmware version do your IS70B servo boards have?

Thank you, thank you very much. Have a great weekend!

reply »


SME

#61673

Fuji servo IS70B board error codes? | 23 April, 2010

Hi Rodrigo, Have you fixed your CP65? do you need some help? llew

reply »

SMT Custom Nozzles

SMT in-printer dispensing