Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Socket in wave soldering

Views: 2029

#61267

Socket in wave soldering | 28 February, 2010

Dear all There are alot sockets in our products,BIB.These skts are lifted abit after being solderd with wave machine.If the skts become lifted, how much tolerance of the high is acceptable? as example 1mil~5mil,or,1mil~8mil. Pls advise me. Thanks in advance.

reply »

#61273

Socket in wave soldering | 1 March, 2010

Your IPC-610 workmanship manual will have the answer for you (I don't have the latest at my fingertips). Depends on what class you are building too, 1, 2 or 3 and the application of this connector on the product- which you must determine.

reply »

#61308

Socket in wave soldering | 5 March, 2010

Just got this off the wire, new IPC A610E Document -due out in April:

http://www.solder.net/marketplace/product_desc.asp?Sku=IPC-A-610E&Category=61

reply »

reflow oven profiler