Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


MPM Accuflex Camera not initializing

Views: 3458


rem

#61194

MPM Accuflex Camera not initializing | 22 February, 2010

Just bought a used machine and everything was working fine and now the camera will not initialize. Powered down completely and rebooted, same thing. I powered down again moved camera to center of axis, it moves to the lower right hand corner which I assume is a home position and fails to initialize still. Any recommendations?

reply »

#61228

MPM Accuflex Camera not initializing | 25 February, 2010

Probably the ribbon cable are broken. I had same issue some time ago. Cable connected to camera and placed under cover. Spare part code is 1007867.

reply »

#61237

MPM Accuflex Camera not initializing | 25 February, 2010

Hello would you want to sell it? Harry

reply »

#61280

MPM Accuflex Camera not initializing | 2 March, 2010

Unfortunately i am not a seller. I am ordering the part from sincotron.eu I dont know your location but if you are in EU then contact them.

reply »

#61281

MPM Accuflex Camera not initializing | 2 March, 2010

Hi. It sounds like you may have the problem under control as you have ordered parts but if it still doesn't work please don't hesitate to contact us at sales@accuspares.com or visit our website http://www.accuspares.com. We should be able to help.....

reply »

#61365

MPM Accuflex Camera not initializing | 15 March, 2010

hi,

check the home sensors if they are working specially on the right side rail of the camera where you had the failure.

reply »

PCB machines

HeatShield Gel- thermal PCB shield during reflow