Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Fuji FCP-IV-2 error

Views: 1852

#61127

Fuji FCP-IV-2 error | 16 February, 2010

We powered up our CP-IV today and got an error. About 7 seconds after power on page 000 comes up with nothing in any of the areas except for second status area which contains "LD INIT" in yellow. After about 16 seconds the second display area gets "LOADER INIT ERROR".

The PLC in the cabinet with the I/O cage has a flashing status light.

Any ideals?

Thanks, Jerry

reply »

#61144

Fuji FCP-IV-2 error | 17 February, 2010

Remove the HIMV-134 card. Unscrew the piggy back memory card and re-seat it.

See if that helps.

reply »

#61145

Fuji FCP-IV-2 error | 17 February, 2010

It turned out to be the battery in the CP-1 PLC. Replaced the battery and we are back up and running.

reply »

SMT Custom Nozzles

Heller Industries Mark 5获得了 2015年中国SMT远见奖 - 回焊炉领域