Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Automated solder wire feeder

Views: 4180

#60784

Automated solder wire feeder | 6 January, 2010

Hi,

Has anyone have experience with manual soldering iron using automated wire feed? I am looking at poke yoke manual soldering 5 pins LCD and wondering if there are ways to control the volume of the solder applied to the board to minimize missing solder pins. How robust are these kind of units and process and any disadvantages? Thanks.

Peter

reply »

#60843

Automated solder wire feeder | 14 January, 2010

JBC Tools has a wire solder feed solder iron. You can control how much is dispensed to the tip. I have sold several of these to customers soldering wires in to terminals. The hand piece is bigger than the typical solder iron but it beats the alternative. I rep in Ohio and W. PA. Not sure where you are from but you can always go to their website for more detailed information. Any questions please ask.

reply »

#60967

Automated solder wire feeder | 29 January, 2010

hi peter, i have experience with manual soldering iron using automated wire feed,please email to me about it in detail,thank you.email:steven@ludeecircuits.com

reply »

SMT Custom Nozzles

Boundary Scan