Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


SMT OEE Calculator

Views: 10726

#60345

SMT OEE Calculator | 6 November, 2009

How to calculate Availability in SMT mcs? IDeal Rated CPH or Machine programming time? Pls send me SMT OEE Calculator

reply »

#60346

SMT OEE Calculator | 6 November, 2009

Martin Pls find the link for the SMT OEE calculator.

Attachments:

reply »


Rao

#60362

SMT OEE Calculator | 8 November, 2009

Excellent Web OEE calculator...

For Ideal Cycle time we use to take Programming Cycle Time but in this calculator it seems you have taken Equipment Rated CPH. For a Given Board & the placement locations the rated CPH is not at all attainable because the SMT equipment rated CPH is defined as the timetaken to pick a component from the feeder position & place on the board at minimum possible distance.

reply »

#60363

SMT OEE Calculator | 8 November, 2009

Pls explain which one need to consider for Product cycle time. 1) Machine Rated CPH or 2) Programming Cycle time.

reply »

#60364

SMT OEE Calculator | 8 November, 2009

Is this machine capacity constrained?

Are you using IPC-9850 Surface Mount Placement Equipment Characterization?

reply »

#60365

SMT OEE Calculator | 9 November, 2009

No the machine is not capacity constrained.

We do not use IPC-9850. Rated CPH is taken from Equipment manufaturer. Fuji-CP643. Universal HSP4796 We have 3 manufaturing units at different location Difficult to standardize OEE calculation

reply »

#60366

SMT OEE Calculator | 9 November, 2009

If the machine is not capacity constrained, what is the point of measuring how close to the optimum efficiency that it is operating? * Capacity of individual machies are unimportant, unless they are capacity contrained * Capacity of your line is dependent on the highest loaded machine

reply »

Fluid Dispense Pump Integration

 Reflow System