Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Vitronics Soltec delta 5 energy efficient setup

Views: 2162

#59857

Vitronics Soltec delta 5 energy efficient setup | 15 September, 2009

What do you think about optimal setup for 8-hour working shift and 16-hour standby time. What is the most energy efficient setup for standby time? Complete cooldown or maintaining temperature in solder pot?

reply »

#59863

Vitronics Soltec delta 5 energy efficient setup | 16 September, 2009

All the heat that comes off the machine comes from powering the machine. The more heat that comes off it, the more energy that went into the machine.

When the machine is cold there is no heat energy leaving the machine. Therefore complete cooldown is more efficient.

reply »

#59865

Vitronics Soltec delta 5 energy efficient setup | 16 September, 2009

There has been a thread on the subject in 2007 with record postings. Check here: http://www.smtnet.com/Forums/index.cfm?fuseaction=view_thread&CFApp=1&Thread_ID=11796&#Message50533

reply »

PCB machines