Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


XP142E R AXIS Servo Error

Views: 1798

#59655

XP142E R AXIS Servo Error | 26 August, 2009

In XP142E very often we are exprencing the R Axis Servo error. When we reduce the Speed to 0.5 it becomes OK. Any body can give solution for this.

reply »

#59665

XP142E R AXIS Servo Error | 26 August, 2009

check R-axis mechanical backlash...

reply »

#59793

XP142E R AXIS Servo Error | 5 September, 2009

> check R-axis mechanical backlash...

After checking R Axis Backlash, Coupling. If still the Problem continues. We have the same issues & when we asked Jagadeesh Rajagopalan , he suggested following action item Check the servo Error display. If it is C80 then Should be encoder cable problem. 1. Change the encoder cable . 2. Reset the SerVo by keeping the Axis in the Origin Position. then the problem solved. Try this.

reply »

Solder Paste Inspection

PCB, BGA Rework Services