Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


DEK Stencil image offset?

Views: 3865

#59312

DEK Stencil image offset? | 16 July, 2009

Hello,

We have a DEK 265 we will run our boards front justified with relation to the stencil, can anybody give me an offset that you are using to order your stencil when the image is in the front?

Thanks

reply »

#59315

DEK Stencil image offset? | 17 July, 2009

just tell the stencil house, have it cut at center of front stencil. how about your DEK with auto stencil loading of manualy pull rod???

reply »

#59318

DEK Stencil image offset? | 17 July, 2009

thanh,

It has a pullrod. I will order the stencil as you suggested, center and I'll just offset it with the pullrod.

Thanks for your input!

reply »

#59319

DEK Stencil image offset? | 17 July, 2009

See attachment. Hope it is useful.

Attachments:

reply »

#59321

DEK Stencil image offset? | 17 July, 2009

> See attachment. Hope it is useful.

DucHoang,

Thanks for the info. This is exactly what I was loking for, since I didn't have a DEK manual with me.

Thanks a lot!

reply »

#59326

DEK Stencil image offset? | 19 July, 2009

For 29x29; 622mm from rear (outer) edge of frame to front edge of board.

reply »

#59373

DEK Stencil image offset? | 24 July, 2009

I use Center Edge, and adjust stencil offset. It's very easy, you just have to give it the PCBs width.

An other advantage is that If your PCB has scrap strips, and you lose them, or PCB changes, you can print it anyway.

reply »

#59388

DEK Stencil image offset? | 25 July, 2009

Why are you using front edge justification?

We have never used anything but centre justification. How big are your boards and where are the "image"? In the respect of the Boards?

reply »

PCB Soldering Tools

3D SPI