Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Straddle Mount Connector, attachment methods?

Views: 3999

#58916

Straddle Mount Connector, attachment methods? | 27 May, 2009

These are becoming extremely popular at my company. I have searched the SMTNet archives and found this:

http://www.smtnet.com//forums/index.cfm?fuseaction=view_thread&CFApp=1&Thread_ID=7575&#Message30119

Has anybody used other attachement methods? Selective Wave, Selective Soldering, localized heat, preforms, etc?

reply »


JAX

#58917

Straddle Mount Connector, attachment methods? | 27 May, 2009

Universal use to sell a a device, machine mountable, that could place this connector. I am not sure if they still sell it... It has been 3-4 years since I saw it in action.

The upgrade would force the boards stops to remain in the Up position while a placement arm would slide the connetcor onto the leading edge of the board.

Probable won't help much if you don't have Universal though...

reply »

#58927

Straddle Mount Connector, attachment methods? | 28 May, 2009

Have you ever thought about SIPAD solid solder for this application.

reply »

#58933

Straddle Mount Connector, attachment methods? | 28 May, 2009

Please send me the link or info. on this.

reply »

#58934

Straddle Mount Connector, attachment methods? | 28 May, 2009

You might look at Teka.

http://www.tekais.com/

reply »

Essemtec Fox Compact Automatic Pick and Place

ii-feed SMD Intelligent Feeder