Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Fuji Flexa Transmission error

Views: 3262

#58347

Fuji Flexa Transmission error | 13 March, 2009

Can somebody take a look at this screen shot and tell me what it is supposed to mean. Every time I try to transmit this program to my CP642 machine I get this error. Does any one know what this error means and how would I correct it? Thanks for your help.

Attachments:

reply »

#58357

Fuji Flexa Transmission error | 16 March, 2009

hi dman97,

have you generated your program without errors?

if yes you pls check this folder and look for CP642M_FEEDERSETUPDEF.XML pls post the snapshot.

Attachments:

reply »

#58360

Fuji Flexa Transmission error | 16 March, 2009

Here is the screen shot. The program does generate with no errors. This is the only program to give me errors. All others transmit fine.

Attachments:

reply »

#58362

Fuji Flexa Transmission error | 16 March, 2009

do you have client pc? does the same job was opened and generated from different client pc at the same time?

reply »

#58381

Fuji Flexa Transmission error | 17 March, 2009

Never mind. I figured it out. It seems that the part numbers I assigned were too long. I shortened them to 15 characters and it worked. I find it strange that the p/n's were too long, but Flexa did not catch this as an error, and instead proceeded to generate the recipe. Anyway, lesson learned, and thanks for your help.

reply »

SMT Custom Nozzles

PCB Soldering Tools