Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Siemens/Tecnomatix Assembly Expert 7.3.0 problem

Views: 2052

#57566

Siemens/Tecnomatix Assembly Expert 7.3.0 problem | 10 December, 2008

Hello!

I have a problem with Assembly Expert 7.3.0. During optimization of the assembleon AX5 an error occurs;

The program seems to have a problem connecting the machine library with the component library (device.lib). Even though I have defined the shape, measures, nozzle definition, e.g. in the machine library and in the component library the optimizer doesn't recognize the stated shape.

I have solved this problem temporary by stating the shape to UNKNOWN, but this only transfer the problem to the machineoperators (they can bypass this problem but it is timeconsuming) I don't feel that this a solution in the long run.

BR

Daniel Sundberg SMA Production Engineer Flextronics ltd. Linkoping Sweden Daniel.Sundberg@se.flextronics.com lkpdsund@SMTNET

reply »

#57581

Siemens/Tecnomatix Assembly Expert 7.3.0 problem | 12 December, 2008

Problem Solved! I had copied incorrect existing shapes from our library and renamed them to the desirable shape.

reply »

SMT Custom Nozzles

Reflow Ovens thermal process improvement