Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Dek model questions

Views: 2194

#57533

Dek model questions | 8 December, 2008

Would anyone know the differences between a DEK 265 LT, DEK 265 GSX and a DEK 248? Thanks.

reply »

#57542

Dek model questions | 9 December, 2008

256 LT or Lite, low end fully auto machine, lower res alignment camera, not as accurate and repeatable as GSX. Wiper and Auto Paste dispensing optional. GSX is fully loaded with hi end camera alignment, auto paste, vac stencil wiper, may have auto flex support pin tooling too. 248 is a semi-automatic machine, hand load/unload of PCB. May have manual vision alignment option.

You can get details here:

http://www.dek.com/web.nsf/de/manual_gsxlt

http://www.dek.com/web.nsf/dek/product_248

reply »

#57579

Dek model questions | 11 December, 2008

Sort of accurate on the LT... It started off that way (earlieast machines had shuttered camera like a GS), but quickly became the same machine as a GSX. Had same cameras (black, them silver, then green) same screen cleaner options, same tooling options. Never saw an LT with an FPA {but who would want one (http://www.dekhead.com/id34.html)}.

The fact that the above manual link is to a single manual for GSX and LT pretty much tells it.

DEKHEAD

reply »

StikNPeel™ Rework Stencils

Electronics Equipment Consignment