Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Jot Automation inspection conveyor failure

Views: 976

#57024

Jot Automation inspection conveyor failure | 21 October, 2008

I have problem in Jot Automation inspection conveyor. The Problem is that the Good board has to go in down side conveyor & Bad board has to go in upside for rejection or rework. It is unable to separate the good & bad boards. Kindly refer the attachment.

* Conveyor is installed after AOI machine. After inspecting the board in AOI it sends the signal to the conveyor whether it is Good board or Bad board.

Attachments:

reply »

#57033

Jot Automation inspection conveyor failure | 21 October, 2008

How does the conveyor know if a board is good or bad?

reply »

#57045

Jot Automation inspection conveyor failure | 22 October, 2008

Conveyor is installed after AOI machine. After inspecting the board in AOI it sends the signal to the conveyor whether it is Good board or Bad board.

reply »

PCB X-Ray Inspection

pcb components X-ray inspection