Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


smt machine of fuji machine nxtII

Views: 3468

#56702

smt machine of fuji machine nxtII | 26 September, 2008

i want to know all the deep details of fuji NXT II .for eg what is the features of NXTII ,specification,power consumption ,weight,height ,nozzle exchange while production option aviliable ,etc.

reply »

#56703

smt machine of fuji machine nxtII | 26 September, 2008

Have you asked your lokal Fuji dealer?

reply »

#56718

smt machine of fuji machine nxtII | 26 September, 2008

> Have you asked your lokal Fuji dealer?

very helpful

reply »

#56726

smt machine of fuji machine nxtII | 29 September, 2008

no i want to know from urside .So please sent me the necessary details of NXT ii

reply »

#56731

smt machine of fuji machine nxtII | 29 September, 2008

#56777

smt machine of fuji machine nxtII | 1 October, 2008

Obviously nobody can help you Jack.

reply »

#56785

smt machine of fuji machine nxtII | 2 October, 2008

> Obviously nobody can help you Jack.

1. its the camera for parts recognition ( enhanced CMOS ). 2. positioning system upgraded from ball screw to linear motor/gantry. before CPH=16500 new CPH=18000 using H12S

reply »

#56797

smt machine of fuji machine nxtII | 2 October, 2008

Contact your local Fuji dealer. Your questions are covered on first couple of pages of spec. Your reluctantness to contact Fuji direct sounds as though you are a competitor scratching for info. Pick a phone, call Fuji.

reply »

#56805

smt machine of fuji machine nxtII | 3 October, 2008

Hi,

I just saw the new NXT machines at globaltronics in Singapore, and mostly they are faster.

However what was interesting is Fuji shows a prototype of the new XPF machine, but it was called XPF-W which handles really large PCB's and uses the same motor feeders as NXT. This machine has the changeable nozzles as the new XPF machine, and watching it change a turret for a single placement head was amazing, but the machine is also much faster than the XP series machines, so it really fly's.

But the best thing is they have added auto tooling support placement, so it's got all the benefits of NXT now, but can do large boards if you have the space for these larger machines. NXT is smaller footprint if your doing small boards.

The sales guy said the XPF-W would be available Q1 next year. Nice machine, and I want to buy a bunch of them as soon as they become available.

Fuji also have a nice new stencil printer, but there was no word if it will do the larger prints for the larger machine they were showing, so that's a bit odd.

Also, on the MYDATA booth they had a cool vertical storage for reels of components. It's a dry cabinet, but you can request a component and it auto fetches it for you and presents it. Nice because the floor footprint was really tiny, so it could be right next to the pick and place machines. It works by itself, but apparently when used with a MYDATA it will get the next component that's about to run out.

Grant

reply »

SMT Custom Nozzles

PCB equipment