Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


ASG BMEP-5T Press

Views: 3179

#56646

ASG BMEP-5T Press | 23 September, 2008

Does any one have a manual on this press? I am having problems with mine during homing. It seems that the Z axis sensors are not seeing the Z axis and it runs into hard limits.

Thanks for any help provided

reply »

#56647

ASG BMEP-5T Press | 23 September, 2008

I just found my manual and notes. Is your error Z out of range on profile #? Please include exact error next time.

reply »

#56651

ASG BMEP-5T Press | 23 September, 2008

Exact Error Message:

Following error on Z axis

Happens during Homing the machine. Right now as Z Up

reply »

#56654

ASG BMEP-5T Press | 23 September, 2008

Sounds to me that your machine Zero is in correct. Do you have the "thickness probe" and your 2" spacer block if so you need to use these to reset your zero point. This is a bit involved E-mail would be easier list your e-mail and I can talk you thruogh it.

reply »

#56656

ASG BMEP-5T Press | 23 September, 2008

Thanks Bob,

My email is jarmato@nbscorp.com

My mobile phone is 951-216-5060

reply »

#56666

ASG BMEP-5T Press | 24 September, 2008

Morning Bob,

Do you have a contact at Tyco for service on this? If you post that I will schedule service and get the tools that I need to get this press running.

Thanks, Jeff

reply »

#56678

ASG BMEP-5T Press | 24 September, 2008

To everyone that helped Thank you!!!

Got it up and running Thanks Bob, Dean and Bob at Tyco support!!!

Jeff

reply »

reflow oven profiler

Heller Industries Mark 5获得了 2015年中国SMT远见奖 - 回焊炉领域