Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Quad QSP2

Views: 919

#56582

Quad QSP2 | 18 September, 2008

Hi Does anyone know the cause and cure for a QALIGN DEVICE1 TIME OUT / SYSTEM ERROR when a QSP-2 machine is initializing any help would be most welcome

reply »

#56583

Quad QSP2 | 18 September, 2008

Check the fuses on the quad align card. There are 2 on each card. They are surface mount type. Typically one of these have blown.

Good luck

reply »

SMT Custom Nozzles

reflow oven profiler