Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Anyone with 2001 era DEK 248 experience?

Views: 1176

#56054

Anyone with 2001 era DEK 248 experience? | 19 August, 2008

Just wanted to check and see if anyone out there has experience with 2001 era DEK 248 screen printers. Trying to set up a new (to me)machine, and I'm running into a bit of trouble.

Please help!

reply »


JAX

#56055

Anyone with 2001 era DEK 248 experience? | 19 August, 2008

I am sure someone here can help. What is your question?

reply »

#56058

Anyone with 2001 era DEK 248 experience? | 19 August, 2008

My first problem is that when the unit homes, the print carriage seems to be traveling too far back. After the carriage reaches its mechanical limit, it continues to try and move back, eventually throwing up a print carriage error. Any ideas?

reply »


AR

#56063

Anyone with 2001 era DEK 248 experience? | 20 August, 2008

If this is machine is of the same type of construction as our 248 with the pneumatic table sliding mechanism, check the 'table out sensor' in the 'digital inputs' section of the diagnostics menu.

rgds AR

reply »

#56073

Anyone with 2001 era DEK 248 experience? | 20 August, 2008

248 Table In/Out is pneumatic (as stated), but I think Shane is referring to Print Carriage which is electrical with positional "encoder" feedback. Need to check for feedback display in output dignostic.

reply »

#56075

Anyone with 2001 era DEK 248 experience? | 20 August, 2008

Got it. The whole carriage travel area had to be recalibrated. Not very familiar with this unit, but I stumbled through it.

Thanks for all of your help.

Shane

reply »

Plasma Prior to Conformal Coating

table top X-ray inspection