Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Dual Process for Reflow

Views: 1736

#55793

Dual Process for Reflow | 1 August, 2008

Hello Reflow Masters;

I'm using an Omniflo-10E reflow oven. Due to high demands of our production in lead free process, can I use my existing leaded line as an native? Does this option affect the lead contamination of the solder in Pb-Free to go beyond acceptability as per RoHS Annex 7 directive? http://www.apcmedia.com/salestools/RLIE-6QJP6V_R0_EN.pdf

I believe that we are exempted with this: 7b) RoHS Content It is prohibited to market electrical and electronic devices containing higher than allowed levels of the environmentally hazardous substances listed in RoHS. Selling appliances containing these substances is prohibited at all levels of trade.

For instance, 8 hours running on leaded followed by lead-free and back to leaded process again, with just changing the recipe per process.

Any thoughts?

reply »

#55794

Dual Process for Reflow | 1 August, 2008

mis-typed, its NATIVE.

reply »

#55795

Dual Process for Reflow | 1 August, 2008

"NATIVE".....

reply »


JAX

#55797

Dual Process for Reflow | 1 August, 2008

I do not really follow what your are asking but...

If you want to know if you can run Leaded and Lead-Free products in the same reflow oven, the answer is Yes.

reply »

#55806

Dual Process for Reflow | 2 August, 2008

he means - native..

reply »

#55807

Dual Process for Reflow | 2 August, 2008

a l t e r n a t i v e.. whats wrongs with this post.

reply »

#55820

Dual Process for Reflow | 4 August, 2008

One oven can run both, but your profiles may vary. You will not contaminate your lead-free by running it behind the leaded stuff. Even if you spell "native" as "native".

reply »

#55867

Dual Process for Reflow | 6 August, 2008

hehehe... nice try.... ok, for the benefit of all, its a. l. t. e. r. n. a. t. i. v. e. We're just wondering why this "word" simply do not appear as it is supposed to be.

reply »

#55870

Dual Process for Reflow | 6 August, 2008

ive does not appear correctly either. It should be s.e.l.e.c.t.i.v.e.

reply »

#55872

Dual Process for Reflow | 6 August, 2008

expecting

reply »

reflow oven profiler

Reflow Oven