Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

I-pulse problem

Views: 1904


I-pulse problem | 29 July, 2008

I have a problem with a I-pulse M1. Monday morning i came back from vecation, and started up the machines. warmed them up, and then..... When i started the program, (normaly it starts with scaning the nozzles) the head moves to the first nozzle, and then stops... without scanning... The Main teach camera works perfektly.... I tryed every possible way now.... is there anyone out there that have had the same problem....?

reply »


I-pulse problem | 30 July, 2008

Call Amistar automation talk to Rick Geisz he should be able to help you out

reply »


I-pulse problem | 26 August, 2008

I solved the problem. It was the print-bord that controlles the cameras... replaced and working again.

reply »


I-pulse problem | 26 August, 2008

Good job I normally swap boards betwen machins to veify what board is burnt up or bad, That is if you have two similar machines.

reply »


I-pulse problem | 27 August, 2008

I doo have 2 similar M1 mashines... so that was my way to doo it allso....

reply »


Used PCB Equipment - AdoptSMT