Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


MPM SPM touch screen replacement ideas

Views: 2186

#55534

MPM SPM touch screen replacement ideas | 15 July, 2008

We have an SPM which has a faulty touch screen (worn out?? who knows). ELOtouch does not have a replacment for this old screen. Has anyone here had any luck replacing it with something else, OR replacing the computer with another, upgrading the software, and moving the control boards to a computer with a mouse and regular display? PEte

reply »

#55537

MPM SPM touch screen replacement ideas | 16 July, 2008

We have been succesful in repairing some of them. If you would want to send it to us we would try to fix it. Would charge you if we was able to repair it. Harry 740-403-9406

reply »

#55540

MPM SPM touch screen replacement ideas | 16 July, 2008

We converted ours from touch screen to a monitor with a mouse.

reply »

#55569

MPM SPM touch screen replacement ideas | 17 July, 2008

How did you convert the touch screen to the monitor and mouse combination? We had the same problem two years ago and tried to do the conversion, but ended up with a new DC/DC power supply card.

reply »

#55571

MPM SPM touch screen replacement ideas | 17 July, 2008

What did the DC to DC power supply card have to do with it, and where was it in the system? Pete

reply »

#55582

MPM SPM touch screen replacement ideas | 17 July, 2008

The screen we had is a Planar EL7768MS. There is a small DC/DC power supply board attahced to the back of the touch screen. That PS board was toasted and caused the failure of the screen. Steve

reply »

#55601

MPM SPM touch screen replacement ideas | 19 July, 2008

We got it working; We replaced the old video card with an older ISA video card to get the display to work. Then we removed the ELO touchpanel ISA card, which cleared an IRQ conflict with the mouse on COM 1. Running mouse drivers AND VGASPM.EXE from our other printer made it all work. Thanks for suggestions from all.... Peter

reply »

ii-feed SMD Intelligent Feeder

PCB machines