Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

Selective soldering

Views: 1219


Selective soldering | 30 May, 2008

What is the distance between smd components that should be held in consideration due to selective soldering ( size soldering nozzle) ?

What is your advise due to the purshase a selective soldering machine.

reply »


Selective soldering | 6 June, 2008


The answer to your question depends on your using a point-to-point system, or nozzles. Some companies might use 3mm as the nozzle wall width.

There are many approaches to selective soldering, depending on your desired cycle time.

I can get you some info on selective if you would like.

Gary 619-587-0804

reply »

PCB machines