Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


West coast testing labs?

#5694

West coast testing labs? | 22 March, 2001

Any recommendations? Looking for someone that's familiar (even intimate) with the IPC-TM-650 stuff.

reply »

#5706

West coast testing labs? | 22 March, 2001

Steve, IPC TM-650 Test Methods Manual is a load.

IPC TM-650 Test Methods Manual: Section 2.1 Visual Test Methods Section 2.2 Dimensional Test Methods Section 2.3 Chemical Test Methods Section 2.4 Mechanical Test Methods Section 2.5 Electrical Test Methods Section 2.6 Environmental Test Methods

Few test shops get intimate with its extent. What is your focus?

reply »

#5715

West coast testing labs? | 23 March, 2001

You can download all the IPC-TM-650 test methods from the IPC website. We've dealt with Trace Labs, but I'm not sure if they have a west coast branch.

reply »

#5719

West coast testing labs? | 23 March, 2001

You can download it??? Then why did they make me pay $200 for it?? Or did you mean it can be downloaded for a price? I'm sure it's not a freebee.

I liked Trace too, but no west coast site unfortunately.

reply »

#5720

West coast testing labs? | 23 March, 2001

Go to http://www.ipc.org/html/fsresources.htm, scroll down and click on downloadable resources and IPC-65-650 is there for the downloading, free. The problem is that you have to download each individual test method, you can't download the entire document or entire sections. If they do charge, I should be getting a hefty bill.

reply »

CAL

#5726

West coast testing labs? | 23 March, 2001

If you do not have any luck finding a west coast lab, but need services I am sure we can help. The only problem is we are on the east coast. Many moons ago empf was on the west coast (China Lake) but moved eastward. We are in Philadelphia, PA.

(skip the next paragraph to avoid a sales pitch) Three full SMT manufacturing line meeting different levels of manufacturing also included are Vapor Degreasing, in-line and Batch Cleaning, Wire Bonding, Chip scale processing, Rework, Solder paste inspection, analytical X-ray, Through-hole, wave soldering, lead -free processing. Other Labs include a full Chem lab, Full Materials lab, failure analysis lab, Environmental Lab and SEM LAB. Two new recent additions include Power Electronics Lab and RF (to 100GHz) Materials and Characterization lab.

www.aci-corp.org www.empf.org

Best regards, Cal

reply »

vacuum tweezers - manual pcb assembly

Heller Industries Mark 5获得了 2015年中国SMT远见奖 - 回焊炉领域