Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


SMT/ PCT edge conveyor replacement belts

Views: 4596

#52831

SMT/ PCT edge conveyor replacement belts | 7 December, 2007

Does anyone kbnow where I can find replacement belts for the old PCT (Process control Technologies) conveyors?

reply »

#52832

SMT/ PCT edge conveyor replacement belts | 7 December, 2007

I have ordered 3/16th and 1/4 from McMaster Carr in the past. you buy it bulk cut it at an angle and melt it together.

I think its Mcmastercarr.com and look into belts or conveyor belting you should be able to find it online there.

reply »

#52863

SMT/ PCT edge conveyor replacement belts | 12 December, 2007

Thanks Bruce. This method is working good for me, for now anyway. I'll have to see how good my splices hold up over time.

reply »

#52874

SMT/ PCT edge conveyor replacement belts | 13 December, 2007

How do you melt it together ?

reply »

#52878

SMT/ PCT edge conveyor replacement belts | 13 December, 2007

I would never have guessed that McM-Carr would carry that stuff (antistatic belts) but you learn something new every day....thanks!

Question, though. Their online catalog says to order by the inch of circumference (OC, or outer circle), implying that you get a finished belt and not a length needing end bonding/welding/gluing/whatever.... not true?

reply »

Gary R. Camac

#52894

SMT/ PCT edge conveyor replacement belts | 14 December, 2007

I have been able to have endless loop edge conveyor belts made for me at Sparks Belting Company. http://www.sparksbelting.com/

reply »

#52899

SMT/ PCT edge conveyor replacement belts | 14 December, 2007

I have had luck with New England Belting: http://www.newenglandbelting.com/ Good Luck

reply »

ii-feed SMD Intelligent Feeder