Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


question for Fuji Flexa

Views: 6390

#52521

question for Fuji Flexa | 15 November, 2007

Dear all,

I want to use fuji flexa software to connect to FIP2 (ROM version 1.82). Does anyone help me to connect it? Do I have to upgrade version of FIP2? Which steps do I have to do to use flexa for FIP2? If it needs to upgrade a higher ROm version, where should I buy them?

Thank ou very much. DH

reply »

#52542

question for Fuji Flexa | 15 November, 2007

Call your local Fuji sales rep becuase it sounds like you need the Flexa interface for the machine.

reply »

#52589

question for Fuji Flexa | 20 November, 2007

just add FIP2 in fujiflexa when you are adding machine at factory lines.

if you are connected just receive the proper data from the machine and re-transmit the proper data.

reply »

#52646

question for Fuji Flexa | 26 November, 2007

If it is anything like my Flexa then you would have to purchase the IP2 module license in order to communicate with the machine from flexa.

I have had to purchase separate licenses for my different pieces of equipment. CP6, NXT, QP3, CP7

reply »

SMT Custom Nozzles

PCB X-Ray Inspection