Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

Solder Profile

Views: 1333



Solder Profile | 16 October, 2007

Hi All,

I understand that reflow Profiles are Product dependant but I would like to compare my profiles to what others are doing. Any input is greatly appreciated.

I have a 5 zone Oven + 2 cooling Zones. ( Leadfree)

If I could get some answers to the following :

1 - Time Between 40 - 150 0c

2 - Time Between 40 - 217 0c

3 - Time Between 150 - 217 0c



reply »


Solder Profile | 16 October, 2007

In the fine SMTnet Archives, grantp gave the following response to a similar question: KIC supplies a free-downloadable software that "takes your profile data and recommends the best oven temperature settings and conveyer speed for your oven. The software has paste settings for lots of types of solder paste, so you know the process window you need to fit. If your new at it, the auto profiling software for the KIC might do what you need, and make the profiling simple."

reply »

ii-feed SMD Intelligent Feeder

vacuum tweezers - manual pcb assembly