Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Solder contamination

Views: 1348

#51606

Solder contamination | 30 August, 2007

Hi we are currently experiencing a problem with solder contamination of the gold contact pads on our pcbs following the reflow process, possibly through sputtering. We have been advise that this can be caused due to the pcbs being humid or due to the stencil not being completely clean. We've excluded the latter and will be tempering future boards prior to the run. Can anyone indicate any other possible causes of this contamination as our reject rate is too high.

reply »

#51608

Solder contamination | 30 August, 2007

Search the fine SMTnet Archives to find threads like: http://www.smtnet.com/Forums/Index.cfm?CFApp=1&Message_ID=51367

reply »

Heller Industries Mark 5获得了 2015年中国SMT远见奖 - 回焊炉领域

SMT in-printer dispensing