Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


MCS30: how to transfer data from a windows PC ?

Views: 4219

#50483

MCS30: how to transfer data from a windows PC ? | 2 June, 2007

Hi all,

We have an MCS30 connected to a CP6 and CP4 smt machines. Every time we need to set up a job, the operator has to type the data at the MCS30 terminal. We already have this data in a Windows PC file. I saw a ethernet and several unused serial ports in the back of the MCS30. The books we have are not much for help. How can I use either the serial or ethernet ports to transfer the data from the Windows PC to the MCS30 ?

Thanks

reply »

#50487

MCS30: how to transfer data from a windows PC ? | 4 June, 2007

Rodrigo, E-mail me and I will send you a scaned page that tells how to do this step by step.We used to have Fuji and this is our notes on programming and sending jobs down to MCS30. Thanks John

reply »

#50511

MCS30: how to transfer data from a windows PC ? | 5 June, 2007

Hi John,

I sent you a reply yesterday. I'm not sure if you got it. I'm new here. I clicked your name to email you. I assume that was the way you wanted me to reply, but I guess it wasn't :-). Anyhow ... I'm very interested on the step by step instructions you mentioned. Let me know how to get them please.

Thank you

reply »

#50539

MCS30: how to transfer data from a windows PC ? | 6 June, 2007

Rodrigo, Yes send me a E-mail @ john_smith5865@yahoo.com I will send you a step by step instruction sheet. Thanks John

reply »

Heller Industries Mark 5获得了 2015年中国SMT远见奖 - 回焊炉领域

Reflow Oven