Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Heller 1800W

Views: 2235

#50285

Heller 1800W | 18 May, 2007

Hi All! I have a reflow owen Heller 1800W. I have a problem with it - din't work a cooling zone. There isn't radiator - can anybody send me a photo of this radiator and where I can find it ? Pump is not connected - I don't have a electric schematic for heller. Can any one help me ?

GeorgeIII(dog)mail.ru

reply »


DSD

#50306

Heller 1800W | 20 May, 2007

George, The Radiator is only used on the older Nitrogen ready type Heller Ovens to attract the flux toward the Flux Filtration system. There should be two blowers in the Cooling zone where the radiator is to be fitted and there should be 4" ducting entering and leaving the cooling zone to a filter box. Water is pumped to another Radiator in the base of the machine, where it exhausts outside. The latest ovens use a different system to capture the flux. I have a new and used Radiator available. Send me your email address, I will send a photos.

reply »

#50347

Heller 1800W | 23 May, 2007

DSD, I send you my e-mail. Send my your a photos, please. GeorgeIII(dog)mail.ru

reply »


DSD

#50357

Heller 1800W | 23 May, 2007

George, Your email address is not correct.. Can you send it again?

reply »

Reflow Oven

BGA Rework Services