Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Any different between Flat Ribbon and Gull Wing Component?

Views: 1560


ray

#48953

Any different between Flat Ribbon and Gull Wing Component? | 10 April, 2007

Dear Friend, Any one can tell is there any different between Flat Ribbon and Gull Wing Component? Any one pls give an example or provide a picture of flat ribbon component. Thanks.

reply »

Haris

#48983

Any different between Flat Ribbon and Gull Wing Component? | 12 April, 2007

Gull wing components are name on the pin/lead shape of the ICs like sop, qfp, pqf etc while plcc IC package is named on J-lead componets.

Flat ribbon is of cable/wiring type and it is not a component,see this website. http://directory.jimtrade.com/25/flat_ribbon_cables.htm

reply »

#48997

Any different between Flat Ribbon and Gull Wing Component? | 12 April, 2007

On the contrary, IPC-610 refers to flat ribbon leads in the same context as gullwing and "L" leads.

I've always assumed that they were one in the same (could be wrong here...certainly wouldn't be anything new) and have never seen L or flat ribbon references except in IPC-610.

reply »

#48999

Any different between Flat Ribbon and Gull Wing Component? | 12 April, 2007

Steve is right. There is a difference between flat ribbon "devices" and flat ribbon "cable". IPC standards are the same for flat ribbon as gull wing.

Here's a pic for example: http://www.topline.tv/FLATPACK.html

reply »

ii-feed SMD Intelligent Feeder

Facility Closure