Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


programmer or technician of universal hsp 4796a, or 4796b

Views: 1311

ausajid

#48075

programmer or technician of universal hsp 4796a, or 4796b | 1 March, 2007

hi

is any body very good in programming for hsp4796a or hsp4796b. i am stuck in one thing and want any body to help me out. the problem is i am using alternate feeder alonghwith alternate carrige. i want machine to go on alternate feeder first and if it could'nt find components from that feeder than it go to alternate carrige. is it possible????? please help me out....

thanks in advance for any advice and help

reply »

#48095

programmer or technician of universal hsp 4796a, or 4796b | 1 March, 2007

Set FEEDER AXIS in the box of the label ALTERNATE MODE at the OPERATION DATA display. ( to get there go to PROGRAM EDIT/OPERATION DATA/ then press next page.

For reference look in your operation manual 3.7 ALTERNATE MODE.

reply »

SWAG

#48098

programmer or technician of universal hsp 4796a, or 4796b | 1 March, 2007

I could be wrong but I think the use for alternate feeder axis is a way of stopping the carriage so it does not always return to home every time an error condition exist. Saves on time and wear and tear on the machine. As for alternate carriage, I don't know if you can get parts from C2 when C1 runs out or vice versa.

reply »

ausajid

#48115

programmer or technician of universal hsp 4796a, or 4796b | 2 March, 2007

hi

thank you very much for your advice. there was only one option i beleive that should work, i have tried that option today, but still the machine goes to the alternate carrige instead of alternate feeder. the option was in operation mode, alternate feeder axis, there was an option of individual feeder enable/disable. i have tried to disable the the other carrige feeder, but the machine still goes to that carrige and tring to find out the components and once it reach on that feeder, because that feeder was disabled, an massage came up that enable the feeder, press ready and than start. if u have any other clue, i will be much appreciated.

thank you anyway.

reply »

ausajid

#48116

programmer or technician of universal hsp 4796a, or 4796b | 2 March, 2007

hi

thank you for your rely. i think you are right. but there may be an option. i have ask from universal people the other day. they said, they will check from their engineers/highly qualified people and than reply. let see what they suggest.

thank you for your advice and information.

reply »

PCB machines

PCB contract manufacturer