Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Really need Omniflow 7 replacement cooling zone blower motor!!

Views: 1554

Brandon

#46326

Really need Omniflow 7 replacement cooling zone blower motor!! | 21 December, 2006

Does anyone know of a source other than speedline? I know these can be had for $100. Speedline wants $1600. It is a cooling zone blower motor for a cross blow system. Not the same blower you see on the top of the heating zones. This one mounts from the side and spins clockwise. Much appreciated.

Happy Holidays,

Brandon

reply »

#46328

Really need Omniflow 7 replacement cooling zone blower motor!! | 21 December, 2006

What year?

reply »

Brandon

#46330

Really need Omniflow 7 replacement cooling zone blower motor!! | 21 December, 2006

serial # 11875644Where would find a year? thanks

reply »

Brandon

#46332

Really need Omniflow 7 replacement cooling zone blower motor!! | 21 December, 2006

1998

reply »

#46333

Really need Omniflow 7 replacement cooling zone blower motor!! | 21 December, 2006

I have one form a year 2006. Uses the studds to keep track of revolutions. Four wires going to the motor.

reply »

Brandon

#46334

Really need Omniflow 7 replacement cooling zone blower motor!! | 21 December, 2006

Can you send a digital pic to bgoodwin@pentechassembly.com please? Does it turn clockwise when powered on?

reply »

#46340

Really need Omniflow 7 replacement cooling zone blower motor!! | 21 December, 2006

Sent

reply »

#46350

Really need Omniflow 7 replacement cooling zone blower motor!! | 22 December, 2006

Hi,

We have refurbished blowers. Cleaned them, changed bearings, capacitor. These parts are standard parts, you will find them in "any" hardware store and Radio Shack type dealers.

reply »

Jav Thug

#46361

Really need Omniflow 7 replacement cooling zone blower motor!! | 22 December, 2006

pls share the photo with all. I would like to formulate a pie-chart on motor revolution

reply »

Jnet

#46764

Really need Omniflow 7 replacement cooling zone blower motor!! | 17 January, 2007

If you are just wanting a replacement blower for your air crossflow cooling section. You should be able to purchase through Electrovert cheaper than $1600 dollars. Someone must have quoted you more than just a replacement blower.

reply »

ii-feed SMD Intelligent Feeder