Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Would you please all Master teach me how to use the Circuit CAM

Views: 1091

YMC

#45913

Would you please all Master teach me how to use the Circuit CAM | 4 December, 2006

i am a new in SMT production line which my YMC is a small Contract Manufacturing Service. i want to learn more about Circuit Cam Software.

reasonable, i don't know how to convert from Gerber File to Circuit Cam to make a LAYOUT and PCB to my MYDATA machine.

would you please intruct me how to do it?

i am very appriciated for your kindness!

Best Regards, YMC

reply »

rich

#45915

Would you please all Master teach me how to use the Circuit CAM | 4 December, 2006

Maybe try Unisoft ProntoPLACE software to program Mydata. www.unisoft-cim.com/pcbplace.htm 203-913-0782

reply »

____

#45968

Would you please all Master teach me how to use the Circuit CAM | 5 December, 2006

The manual is easy to follow. If using 274-X gerber it is really easy. All you need is a silkscreen layer and a paste or mask layer. If not 274-X, then you also need an aperture file. If you possess a valid license, AEGIS can help you over the phone.

If no license, find someone to convert to centroid for you. I'm sure there is someone out here. My advice, get the manual, its easy to use.

reply »

pcb components vacuum pick up

Used SMT