Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


The Most Difficult BGA Rework EVER!!

Views: 4614

#44953

The Most Difficult BGA Rework EVER!! | 8 November, 2006

Okay, here's the deal-e-o....I need to find the Nation's Best BGA Rework Specialists. I have 50 PCBs each measuring about one square inch, that need to have a BGA Ring Socket Removed, eight capacitors removed, and a new ring socket installed. Sounds simple, but...it's not. Inside the Ring Socket is a CSP component, and between the side of the CSP and the inner wall of the Ring Socket are ten 0603 X2Y Capacitors. And the board is a 12 layer board. And there's a 324 Pin Array Assembly mounted to the bottomside of the PCB that is the same exact size of the board. Does anybody know of a Rework House that they think can handle this??? I'd appreciate any help any of you gurus can provide!!! Thanks in advance!!

reply »

#44956

The Most Difficult BGA Rework EVER!! | 8 November, 2006

Oh yeah, I forgot to mention this is a RoHS compliant PCB. (As if it weren't difficult enough!!)

reply »

Hussman

#44961

The Most Difficult BGA Rework EVER!! | 8 November, 2006

BEST TRONICS TINLEY PARK IL 708 802-9677

reply »

#44962

The Most Difficult BGA Rework EVER!! | 8 November, 2006

Thank you for the Best-Tronics Suggestion. I checked out their website, and although they look to be extremely capable when it comes to cable assemblies, I saw nothing on the website that referenced SMT or BGA assembly or rework.

reply »

Steve

#44963

The Most Difficult BGA Rework EVER!! | 8 November, 2006

Have you looked at Circuit Technology Center? Check them out at: http://www.circuittechctr.com/

I've had rework done by them and they do a very good job.

-Steve-

reply »

#44964

The Most Difficult BGA Rework EVER!! | 8 November, 2006

Hussman, what are you smoking?

I think Hussman meant Best Inc. They do repair and offer several other neat solutions to repair. They can be found at http://solder.net/.

reply »

#44966

The Most Difficult BGA Rework EVER!! | 8 November, 2006

Thank you! I've just sent samples out to both Best and CTC. (Circuit Technology Center). I'll let you all know how this work's out. (These modules are supposed to "change the world")

reply »

Hussman

#44968

The Most Difficult BGA Rework EVER!! | 8 November, 2006

Yeah, you're right, I was thinking Best Inc. Guess that WASN'T a cigarette I had this morning! You da man ...... er-um woman!

Do I still get credit for changing the world, Frazzled?

reply »

#44970

The Most Difficult BGA Rework EVER!! | 8 November, 2006

Process Sciences; 10960 E Crystal Falls Pkwy, Suite 400, Leander, TX 78641; 512-259-7070 F512-259-7073 process-sciences.com

reply »

#44973

The Most Difficult BGA Rework EVER!! | 9 November, 2006

Uhhhhh no, I'm the guy changing the world, but you can be my sidekick if ya want! That work for you Tonto?

reply »


RDR

#44974

The Most Difficult BGA Rework EVER!! | 9 November, 2006

Good luck frazzled! sure would like to see what you got going on though.

Russ

reply »

Hussman

#44992

The Most Difficult BGA Rework EVER!! | 10 November, 2006

Tonto? You�re either calling me a fool in Spanish or in my native tongue (Potowatomie) calling me "Wild One". I trust Kemosabe is talking my language.

reply »

KEN

#45005

The Most Difficult BGA Rework EVER!! | 12 November, 2006

Jp

#45049

The Most Difficult BGA Rework EVER!! | 15 November, 2006

I tend to agree with process science's rec. They are currently doing a board with stacked BGA, and the board is around 18 by 18. Good luck.

reply »

#45699

The Most Difficult BGA Rework EVER!! | 27 November, 2006

Precision PCB Services, Inc.

http://www.pcb-repair.com

reply »

Tarheel

#46046

The Most Difficult BGA Rework EVER!! | 7 December, 2006

vacuum tweezers - manual pcb assembly

PCB Soldering Tools