Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


gerber converter to centroid

Views: 3305

#44488

gerber converter to centroid | 12 October, 2006

Hi all, I'm looking to buy a new gerber converter, which will convert to centroid. This is all we need it to do, nothing fancier, and we don't want to spend a fortune on it either, around about 1000 euro. If anyone knows of such a product please get in touch. Thanks in advance Kevin

reply »

#44505

gerber converter to centroid | 13 October, 2006

Search the fine SMTnet Archives. For instance: http://www.smtnet.com/forums/Index.cfm?CFApp=1&Message_ID=39586

reply »

#44527

gerber converter to centroid | 16 October, 2006

I have been using Unisoft for many years. Works great. http://www.unisoft-cim.com

reply »

#44638

gerber converter to centroid | 20 October, 2006

If i'm not mistaken, wasn't this 'Unicam' at one point in time?

reply »

#44639

gerber converter to centroid | 20 October, 2006

Anyone using Circuit Cam? We too are looking for a gerber/centroid converter. I used the demo of GraphiCode GC-PowerPlace and it works, but seems cumbersome. It's also difficult to substantiate the large capital cost of these programs without being very familiar with the different options.

reply »

#44642

gerber converter to centroid | 20 October, 2006

We use CircuitCam for MyData off-line machine programming, it's wonderful and I don't know how we did without it. But, it's pricey.

reply »

Manufacturing Software

reflow oven profiler