Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


FMI Protocol

Views: 2141

aj

#43608

FMI Protocol | 28 August, 2006

Hi all,

I have just got a second hand bare board loader ( PAF ) It seems to be in good working order . The loader is upline to a Dek 265gsx. I have tried all the FMI protocols but none seem to work. I am now thinking that I moght need a different personality card as existing conveyor was a fuji.

anyone out there have similiar setup?

aj...

reply »

Ola

#43656

FMI Protocol | 30 August, 2006

Yes you do need a different upline interface card. This information should be in Your Technical Reference Manual, Electronics enclosure chapter 6? Y2 Enclosure, card position X8 Downline and X9 upline:

Part No Description. 112045 Base Card 119924 SMPI/UIC (card part no. 112170) 129293 SMEMA (card part no. 112171) 129294 Fuji (card part no. 112716) 129295 Fuji download only (card part no.112716) 129298 TDK (card part no.113936/8) 119923 Dynapert (card part no. 112716) 133125 Sanyo (card part no. 112169) 129297 Siemens (card part no. 112718) 129296 Panasonic (card part no. 112716)

Since You have an GSX and we have an older GS, You might want to look up this information in Your own Technical Reference Manual, Electronics enclosure Y2 enclosure layout (chapter 6.65?). Concider also to give DEK a phone call, it could save You time and money. /Good luck.

reply »

aj

#43657

FMI Protocol | 30 August, 2006

Thanks,

I needed the Smema Card .

cheers,

aj...

reply »

Flying Probe Tester

PCB Cleaning