Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


RV/D axis counting error. (S20)

Views: 1456

seth

#42970

RV/D axis counting error. (S20) | 26 July, 2006

I have problem with RV/D axis counting error. I have tried several things, but it just doesn't help. These are the things I had tried 1. Check all 12 segment for dirty. 2. Check DP motor for proper operation. 3. Replaced reader. In order for me to perform RV/D head calibration I have to clear this error out or else it won't let me.

reply »

#42985

RV/D axis counting error. (S20) | 27 July, 2006

Seth, have you tried the zero point on the star?

reply »

seth

#43011

RV/D axis counting error. (S20) | 27 July, 2006

Yes, I have but if I don't then I won't be able to reference run.

reply »

#43074

RV/D axis counting error. (S20) | 30 July, 2006

Do the sleeves spin freely in the segment? Could also be that the reader needs to be readjusted.

reply »

seth

#43103

RV/D axis counting error. (S20) | 31 July, 2006

What is the distance from the reader to the segment, and can you use a filler gauge to set the gap or is there a special tool needed?

reply »

seth

#43128

RV/D axis counting error. (S20) | 1 August, 2006

My problem solved. I had to re-adjusted the reader,

reply »

#43138

RV/D axis counting error. (S20) | 2 August, 2006

Good Job!!

reply »

Solder Paste Inspection

 Reflow System